Products

Industrial Oil

  • AMINOL HYDRAULIC HLP

    AMINOL HYDRAULIC HLP series oils are formulated from highly refined mineral base stocks exhibiting very good demulsibility and air-release properties blended with a highly efficient additive system including rust, oxidation and corrosion inhibitors and anti-wear agents. AMINOL HYDRAULIC HLP series oils are developed for use as working media in hydrostatic lubrication systems and in circulating systems for the lubrication of moving parts and mechanism. Both applications require lubricants of very high oxidation stability, improved anti-wear and anti-scuffing properties and ensuring reliable R&O protection. AMINOL HYDRAULIC HLP series oils are suitable for application in hydraulic systems equipped with hydraulic vane pumps, hydraulic gear pumps and hydraulic piston units. It is also effectively used as working fluid in plastic component extruders.

    API:
      ICONS HERE
    AMINOL HYDRAULIC HLP
  • AMINOL İndustrial HYDRAULIC HVLP

    AMINOL İndustrial HYDRAULIC HVLP series oils are formulated from highly refined mineral base stocks exhibiting very good demulsibility and air-release properties blended with a highly efficient additive system including rust, oxidation and corrosion inhibitors, anti-wear agents and a polymethacrylate VII (Viscosity Index Improver). AMINOL İndustrial HYDRAULIC HVLP series oils are suitable for use in hydraulic systems subjected to widely varying temperatures from minus 30oC to +50oC, i.e. as in the open. It is intended for use in hydrostatic lubrication systems and moving parts in circulating systems, demanding lubricants with very high oxidation stability, improved anti-wear and anti-scuffing properties, good R&O protection and high shear stability. Oil is suitable for use in hydraulic systems hydraulic vane pumps, hydraulic gear pumps and hydraulic piston units. Thanks to the high quality base oils and additives used in the formulation of this oil it is well suited for hydraulic system operated at very high pressures exceeding 25 MPa and oil temperatures exceeding 90oC.

    API:
      ICONS HERE
    AMINOL İndustrial HYDRAULIC HVLP
  • AMINOL Turbine Oils

    AMINOL Turbine Oils are formulated from a special selection of highly refined lube base stocks exhibiting very high resistance to deterioration blended with a special highly efficient ashfree additive package. The premium quality turbine oils AMINOL Turbine Oils are developed to lubricate steam, water and gas turbines. This turbine oil exhibits superior oxidation stability demonstrated by more than 1000 hours in RBOT Test, as well as good corrosion protection. The oil is also suitable for the lubrication of the associated with turbines equipment and assemblies and as well as the systems governing them. Baths and circulating systems, oillubricated bearings of different types, from moderately to medium loaded assemblies and hydraulic systems under low to moderate pressures are among the other typical applications. The improved corrosion performance in synthetic sea water makes these turbine oils suitable for application in on-board compressors and turbines in different vessels as well as other auxiliary ship equipment. AMINOL Turbine Oils meet and exceeds the requirements of major OEM such as Alstom, Siemens, GE, etc.

    API:
      ICONS HERE
    AMINOL Turbine Oils
  • AMINOL Compressor Oils

    The compressor oils AMINOL Compressor Oils are designated to lubricate rotary and piston type compressors with low and medium output capacities, and output air pressures lower than 1000 kP and output air temperatures up to 140oC. AMINOL Compressor Oils are formulated from a carefully balanced selection of high quality solvent refined and hydrotreated base stocks of paraffinic-naphthenic type. AMINOL Compressor Oil 100 may be used in oil sealed mechanical vacuum pumps at low vacuum up to 1.3.10-1Pa and non-aggressive gases, where lubricants meeting OCT 3801402-86 & TGL 15291-R910 are required.

    API:
      ICONS HERE
    AMINOL Compressor Oils
  • AMINOL Compressor Oil VDL

    The compressor oils AMINOL Compressor Oil VDL are developed for lubrication of piston type compressors, equipped with circulating or mixed type lubricating systems demanding oils of high oxidation stability, enhanced lubricating properties, R&O protection and output air temperatures up to 140oC, in some cases depending on compressor type and working conditions up to 220oC output air temperature. The compressor oils AMINOL Compressor Oil VDL are designated to lubricate rotary (vane and screw) type compressors with low and medium output capacities, and output air pressures lower than 1500 kPa (15bar) and output air/oil temperatures up to 100oC. AMINOL Compressor Oil VDL oils are formulated from a special selection of high quality solvent refined and hydrotreated paraffinic-naphthenic base stocks blended with a highly efficient additive package.

    API:
      ICONS HERE
    AMINOL Compressor Oil VDL
  • AMINOL Refrigerator Compressor Oils

    AMINOL Refrigerator Compressor Oils are recommended for lubrication of refrigerators and refrigerating equipment operating with ammonia as refrigerant. The refrigerator compressor oils AMINOL Refrigerator Compressor Oils are blended from a special selection of high quality highly solvent refined and hydrotreated naphthenic base stocks.

    API:
      ICONS HERE
    AMINOL Refrigerator Compressor Oils
  • AMINOL Heat Transfer Oils

    AMINOL Heat Transfer Oils are formulated with highly refined narrow-cut base stocks and an advanced additive package. They are recommended for use as heat-transfer oil in forced circulating systems with indirect heating.

    API:
      ICONS HERE
    AMINOL Heat Transfer Oils
  • AMINOL Slide Oils

    AMINOL Slide Oils are formulated from highly refined paraffinic/naphthenic type base oils possessing good inherent demulsibility and air release properties blended with a highly efficient additive package to ensure excellent lubricating, antiwear and adhesion properties and reliable R & O and corrosion protection. AMINOL Slide Oils are intended to lubricate horizontal and vertical slideways and plain bearings of metalworking machines.

    API:
      ICONS HERE
    AMINOL Slide Oils
  • AMINOL GEAR OILS

    AMINOL GEAR OILS are industrial gear oil that developed for heavy working conditions and developed for high quality, performance and compressive strength. It have manufactured with special additives and very well refined base oils. It can use for all closed systems and industrial gear systems. AMINOL GEAR OILS can be used for particularly spur, helical, bevelled and worm gears and other all closed system gears, for industrial gears operating under heavy or shock loads and for conveyors, extruders, dryers, fans, mixers, presses, pulp machines, pumps and coupling spindle, threated rod and roller bearings operating under heavy load at low speeds

    API:
      ICONS HERE
    AMINOL GEAR OILS
  • AMINOL MOULD OILS

    AMINOL MOULD OILS are formulated from selected highly refined paraffinic-naphthenic base oils blended with an additive package, imparting very good lubricating, adhesion and mould release properties to the oils as well as ensuring dependable corrosion protection of formworks and easy separation during removal of shutters (deshuttering). AMINOL MOULD OILS are developed for the lubrication of formworks (shutters) in the production of concrete, reinforced concrete and aerated concrete products and components as they facilitate their removal from the formworks during deshuttering. They can be applied by brush or sprayer. When the proper viscosity grade oil has been chosen the oil consumption can be reduced to less than 1 liter per 20-25 m2 area of formworks/shutters.

    API:
      ICONS HERE
    AMINOL MOULD OILS
  • AMINOL MOULD OIL 150

    AMINOL MOULD OIL 150 is formulated from selected highly refined paraffinicnaphthenic base oils blended with an additive package, imparting very good lubricating, adhesion and mould release properties to the oil as well as ensuring dependable corrosion protection of formworks and easy separation during removal of shutters (deshuttering). AMINOL MOULD OIL 150 is developed for the lubrication of formworks (shutters) in the production of concrete, reinforced concrete and aerated concrete products and components as they facilitate their removal from the formworks during deshuttering. Product can be applied by brush or sprayer.

    API:
      ICONS HERE
    AMINOL MOULD OIL 150
Aminol headquarters

Icheri Sheher, Vali Mammadov Street 3,
Baku, Azerbaijan, AZ1000

Tel. +994 12 585 10 05
Fax +994 12 505 68 11
Email info@aminol.az